Book Us for Electric Panel Upgrades in Allen, Texas

Need help with an electrical panel upgrade?

Contact our Tarrant, Denton & Dallas Counties electricians today for quality solutions.

An electric panel upgrade in Allen, Texas is a necessary task for ensuring the safety and proper functioning of your home’s electrical system. An electric panel, also known as a breaker box or electrical service panel, is the main point of distribution for electricity in your home. It controls and distributes the electrical power throughout your home, and if it becomes outdated or overloaded, it can cause a variety of problems such as power outages, circuit overloads, and even electrical fires.

There are several reasons why an electric panel upgrade may be necessary. One of the most common reasons is that the panel is outdated and can no longer handle the electrical load of the home. This can occur if the home has been added onto or if the electrical usage has increased over time. Another reason for an electric panel upgrade is that the panel is not up to current safety codes, which can put the home at risk for electrical fires.

The process of upgrading an electric panel typically involves the following steps:

  1. Conducting an assessment: An electrician will conduct an assessment of the existing panel to determine its condition and whether or not an upgrade is necessary. They will also assess the electrical usage of the home to determine the size of the new panel that is required.
  2. Obtaining permits: Before the electric panel upgrade can begin, the necessary permits must be obtained from the city of Allen, Texas. This is to ensure that the work is done up to the standard and the safety of the house is not compromised.
  3. Disconnecting power: The power to the panel must be disconnected before the upgrade can begin. This is a crucial step that must be done to ensure the safety of the electrician and the homeowner.
  4. Removing the old panel: The old panel will be removed, and the electrical wires will be disconnected from the panel.
  5. Installing the new panel: The new panel will be installed in the same location as the old panel. The electrician will connect the electrical wires to the new panel and make sure that it is properly grounded.
  6. Testing and inspection: The electrician will test the new panel to ensure that it is working properly and that there are no issues with the electrical system. After the work is done, the city inspector will come to inspect the work and give the final approval.

It is important to note that upgrading an electric panel is a complex task that should only be performed by a licensed and experienced electrician. This work requires knowledge of electrical codes and safety regulations, and they have the tools and equipment required to complete the upgrade safely.

In summary, an electric panel upgrade in Allen, Texas is a necessary task for ensuring the safety and proper functioning of your home’s electrical system. The process typically involves conducting an assessment, obtaining permits, disconnecting power, removing the old panel, installing the new panel, and testing and inspection. It’s always recommended to hire a licensed electrician who can handle the permits and inspection process as well and have the knowledge and equipment to do the job safely.

TopTech Electric also offers Electrical Inspections, Outlet Installation, Ceiling Fan Installation, Surge Protection, Lighting Installation, Smoke Detectors, Circuits & Wiring Inspection & Repair, Electric Vehicle Charging, Grounding, Smart Home Devices and Power Restoration.

Our experts at TopTech Electric can help you safely carry out electrical panel upgrades. Give us a call today to request an estimate or book an immediate service in the DFW Metroplex.

Problems That Can Affect Electrical Panels

If you are experiencing recurring electrical problems, don’t hesitate to contact our experts for immediate help. We will inspect your system for circuit or wiring problems.

Common signs of trouble in the electrical panel include:

Frequently tripped circuit breakers

Circuit breakers are designed to trip whenever a power surge occurs. But if your breakers seem to be tripping on a frequent basis, this could signal an underlying issue with your electrical system and will require immediate attention.

Hot circuit breakers

It’s normal for circuit breakers to feel warm, but not hot to the touch. Hot circuit breakers are usually accompanied by crackling or buzzing noises. This problem is typically caused by loose connections between the breaker and wires, or a damaged bus bar.

Flickering or dimming lights

Noticing that your lights flicker or dim when a large appliance starts running, or when your AC turns on and off? There is likely a wiring problem that may call for an electrical upgrade.

Installing a New Appliance? Your Electrical Panel May Need an Upgrade

Electrical panels in older homes will likely only have the minimum amperage required, which is 100 amps. For residential properties, 100 or 150 amps are typically enough to power the appliances and devices in most homes.

However, if you are planning on installing heavy-duty appliances such as tankless water heaters or even electric vehicle charging stations, it will be necessary to upgrade your electrical panel to increase the available amperage. You may also want to consider upgrading your electrical panel if you plan to add new rooms to your home.

Our experts will take the time to discuss your specific concerns, and make sure you receive the solution that works best for your home and your household’s needs.

Contact Us Today for Professional Electrical Panel Upgrades in Dallas-Fort Worth

At TopTech Electric we are committed to helping customers throughout DFW complete their electrical projects safely and efficiently. Our services are carried out to exceed the highest standards and guaranteed to meet building and electrical codes.

No matter the cause of your electrical problem and no matter your needs, you can count on our team of dedicated experts to provide you with the quality service and peace of mind you deserve.

> give us a call

DFW Electrician | TopTech Electric Tarrant County Electrical Professionals
Based on 523 reviews
Worked with them twice. 10/10 both times. I have no complaints. Only that I should have hired them the first time around instead of a local handyman that led to a patio fan getting ruined.
Jay Martin
Jay Martin
18:49 29 Mar 23
Great service. Vey professional I would totally recommend this company
Robin Bouchard
Robin Bouchard
10:33 29 Mar 23
Very good quality work and friendly staff. Will use again and I highly recommend this company.
Adam N.
Adam N.
18:49 24 Mar 23
The Matthew’s team did a great job. All my questions were answered and I was walked through everything. They were able to come out and then do the work with a pretty fast turn around. I would definitely recommend.
Samm Steere
Samm Steere
02:09 22 Mar 23
Allan with TopTech Electric did an amazing job. They are officially my go to electrical company!
Whitney Ingram
Whitney Ingram
18:23 17 Mar 23
Mathew was very responsive and did the work in a timely and professional way. Very nice working with him.
William Rich
William Rich
20:52 15 Mar 23
Matt, Did a great job. Very professional and knew exactly what the problem was and took care of it. I'll recommend TopTech Electric anytime someone needs a electrician.
Rich Adams
Rich Adams
22:23 08 Mar 23
Explained the work needs to get done and post work completion provided a good summary
M Roshan
M Roshan
04:37 06 Mar 23
Matthew was very professional!! Figured out my electrical issues in minutes, let me know how much it would cost before he started. I will definitely use this company again and highly recommended them! Very happy with work quality!
Olaf Growald
Olaf Growald
21:47 03 Mar 23
Not only did they do the job I requested, they gave me insight on the previous electricians work. Thanks guys!
19:51 03 Mar 23